Mayour Base Gel

1. Complete nail preparation by performing cuticle care and thoroughly removing any oil, moisture, and debris from the natural nail.
2. Apply a thin layer of Mayour Base Gel and cure under a 48W LED lamp for 60 seconds.
3. Shake the gel well before use to ensure the pigments, glitter, or magnetic particles are evenly dispersed.
4. Apply a thin, even layer of Mayour gel.
• For Magnetic Gel: Before curing, hold a nail magnet close to the nail surface (without touching the gel) to create the desired magnetic effect. Once the design on one nail is achieved, flash cure immediately and cure under a 48W LED lamp for 60 seconds when one hand is done.
• For Colour or Glitter Gel: Cure under a 48w LED lamp for 60 seconds.
5. Apply additional coats as desired to achieve the preferred opacity or effect, curing each layer before applying the next.
6. Finish with Mayour Non-Wipe Top Gel and cure under a 48w LED lamp for 120 seconds for a long-lasting, high-gloss finish.

Due to the high concentration of pigments, glitter, or magnetic particles, settling may occur. Shake/Mix thoroughly before each use.

After use, wipe the bottle neck clean before replacing the cap to help maintain product quality and prevent residue build-up.

Apply in thin layers for the best application and curing results.

Avoid contact with skin during application.

For optimal adhesion, wear, colour performance, and shine, we recommend using Mayour Base Gel and Mayour Non-Wipe Top Gel as part of the complete Mayour system.